Menushopping cart
Tools for Working Wood
Invest in your craft. Invest in yourself.
CHECKOUT shopping cart Cart (-)

BEN The Build-It Blog

Carving A Live Edge Bowl - Part 2

01/09/2020 by Yoav Liberman

Carving A Live Edge Bowl - Part 2 1

Click for Part 1 of Carving A Live Edge Bowl

Gouging a shallow branch can be easy. All you need to do is secure your branch segment (read more about it in my previous blog entry) and then use gouges progressively to excavate the wood out. I usually employ #7 gouges. First I use a straight gouge and then a bent gouge. A ¾” and wider are the common sizes that I like to use. In some situations, where a branch parameters or grain topography is irregular, narrow or simply put it - challenging, I would use smaller and curvier gouges (#9, #11) or even a “V” gouge. And for smoothing out the gouged surface after the excavation is done we can use a # 5 or #3 gouges.

In the pictures and video below you can see how one of my 5th grade students is planning the keel of a walnut branch in preparation for hollowing out the inside.

Carving A Live Edge Bowl - Part 2 2



One of the easiest ways to hold a splitted/sawn brach secured for planning its keel is by affixing to it a block of wood using two lag screws. The block is then can be held in the vise to allow for some chisel work and planning to take place.
One of the easiest ways to hold a splitted/sawn brach secured for planning its keel is by affixing to it a block of wood using two lag screws. The block is then can be held in the vise to allow for some chisel work and planning to take place.



If your log/branch length allows it, you can also hold it in a vise for planning its keel.
If your log/branch length allows it, you can also hold it in a vise for planning its keel.


After the keel is flattened the branch can be glued onto a scrap piece of wood which will then be held in a vise to allow for an easy excavation. Other methods of holding the branch secure include an F clamp, a Sash clamp or a simple cleat and a clamp.

Carving A Live Edge Bowl - Part 2 5
With a #7 gouge I hollow out most of the bowl
With a #7 gouge I hollow out most of the bowl

To excavate the deepest parts of the bowl I use a bent gouge.
To excavate the deepest parts of the bowl I use a bent gouge.



Carving A Live Edge Bowl - Part 2 8
Carving A Live Edge Bowl - Part 2 9
One of a few Sassafras branch bowls that I carved recently. It can be used to hold keys, fruits, vegetables, and many more decorative of functional items.
One of a few Sassafras branch bowls that I carved recently. It can be used to hold keys, fruits, vegetables, and many more decorative of functional items.


Next time I will show two techniques to hollow out a bowl using some drill bits.
Add a Comment
Comments are closed.
The opinions expressed in this blog are those of the blog's author and guests and in no way reflect the views of Tools for Working Wood.
Subscribe
JOEL Joel's Blog
BEN Built-It Blog
BREN Video Roundup
EVT Classes & Events
WORK Work Magazine
Newer Entries...
BENPlaying with Japanese Fire in Brooklyn, New York - 09/03/2020
BENTalking About Spoons - 08/20/2020
BENTeaching woodworking During COVID 19 - Part 3 - 07/02/2020
BENCorrugated Cardboard Class for Remote Learning - 06/11/2020
BENTeaching Woodworking During Covid 19 - Part 1 - 05/14/2020
BENNYC Subway Benches Part 2 - 04/09/2020
BENNYC Subway Benches Part 1 - 03/19/2020
BENMario's Cantilever Bracket Rack - 02/20/2020
BENCarving A Live Edge Bowl - Part 3 - 02/06/2020
BENCarving A Live Edge Bowl - Part 2 - 01/09/2020
BENCarving A Live Edge Bowl Part 1 - 12/12/2019
BENBrace Maintenance and Restoration, Part 3 - 11/14/2019
BENBrace Maintenance and Restoration, Part 2 - 10/31/2019
BENBrace Maintenance and Restoration, Part 1 - 10/17/2019
BENRust Removal - The War That Never Ends - Part 2 - 09/19/2019
BENRust Removal - The War That Never Ends - 09/05/2019
BENMarching On - 11/30/2011
BENBrooklyn Guild - 11/07/2011
BENWorking Hard? or Hardly Woodworking in America - 10/06/2011
BENPatterns - 10/02/2011
Older Entries...
Hours: M-F 9:00-5:00, closed Sat,Sun
Our Guarantee & Return Policy
Shipping and Sales Tax Info
Privacy Policy
Holiday Calendar 		Instagram Contact Us: Email: support@toolsforworkingwood.com
Phone: 800-426-4613 or 718-499-5877
Visit Us in Brooklyn: Directions to Our Showroom
© 1999-2019 toolsforworkingwood.com
Powered by 01 Inc. Coded entirely in NYC